Using flooring material as chair mat??
-
@ShiroKuro I'm sure that's what @Steve-Miller means.
Keep in mind that you will not have a beveled edge around the perimeter; how much of a drop there is depends on how thick the plywood is. If you roll the chair off the DIY mat, you will have to stand up to put the chair back; you won't just be able to roll it back onto the mat. Of course if the mat is large enough, that won't happen.
Not sure how thick it needs to be in order to keep from flexing under the combined weight of chair and chair sitter.
@wtg said in Using flooring material as chair mat??:
you will not have a beveled edge around the perimeter; how much of a drop there is depends on how thick the plywood is.
I think he’s thinking that he can sand down the edges.
Or at least round them.If you roll the chair off the DIY mat, you will have to stand up to put the chair back; you won't just be able to roll it back onto the mat.
I have to do that with my chair whenever I readjust the mat. It shouldn’t be the end of the world. But he does need to get the size right
Not sure how thick it needs to be in order to keep from flexing under the combined weight of chair and chair sitter.
Yep, this is my concern/question.
-
The front part of our plastic/gripper teeth mat stuck out beyond the rug at the desk, and it scratched our wood floor. GRRRR. Now there’s a piece of cardboard under that section. Not pretty. But it makes the mat usable.
-
I’d glue the flooring to the plywood, maybe with a bit of trim around it to act as a bumper, then put it under the desk.
-
I’d glue the flooring to the plywood, maybe with a bit of trim around it to act as a bumper, then put it under the desk.
@Steve-Miller said in Using flooring material as chair mat??:
I’d glue the flooring to the plywood, maybe with a bit of trim around it to act as a bumper
Is there a special kind of glue for flooring?
Although at this point, I wonder if we're getting close to the price of a store-bought one...
-
@Steve-Miller said in Using flooring material as chair mat??:
I’d glue the flooring to the plywood, maybe with a bit of trim around it to act as a bumper
Is there a special kind of glue for flooring?
Although at this point, I wonder if we're getting close to the price of a store-bought one...
@ShiroKuro said in Using flooring material as chair mat??:
@Steve-Miller said in Using flooring material as chair mat??:
I’d glue the flooring to the plywood, maybe with a bit of trim around it to act as a bumper
Is there a special kind of glue for flooring?
Although at this point, I wonder if we're getting close to the price of a store-bought one...
Or.... If you are looking for frugal, just get a piece of plywood the size you want. Thick enough to support without bending. A little stain perhaps and some clear finish should give you a good amount of use. Or maybe an epoxe paint? Super durable, just make sure to apply and let it dry out of your living area. Depending on your rug depth, run a few drywall type screws of the appropriate length through to grab the rug and make it stay put.
-
@ShiroKuro said in Using flooring material as chair mat??:
@Steve-Miller said in Using flooring material as chair mat??:
I’d glue the flooring to the plywood, maybe with a bit of trim around it to act as a bumper
Is there a special kind of glue for flooring?
Although at this point, I wonder if we're getting close to the price of a store-bought one...
Or.... If you are looking for frugal, just get a piece of plywood the size you want. Thick enough to support without bending. A little stain perhaps and some clear finish should give you a good amount of use. Or maybe an epoxe paint? Super durable, just make sure to apply and let it dry out of your living area. Depending on your rug depth, run a few drywall type screws of the appropriate length through to grab the rug and make it stay put.
@Rontuner said in Using flooring material as chair mat??:
Depending on your rug depth, run a few drywall type screws of the appropriate length through to grab the rug and make it stay put.
Oh that’s a good idea. This is in the (finished) basement by the way, and I’m guessing that under the carpet and whatever underlayment might here there, is just concrete.
-
Liquid nails or any construction adhesive will work, although as Ron points out the only reason for using flooring over the plywood is to make it look like flooring rather than plywood.
-
@wtg said in Using flooring material as chair mat??:
Hopefully no underfloor heating…..
Nope, not in that room. But the basement bathroom actually has it! And the bathrooms on the main floor as well. I would not have installed those if it had been up to me. We've only turned them on once, to make sure they worked.
@Steve-Miller said in Using flooring material as chair mat??:
as Ron points out the only reason for using flooring over the plywood is to make it look like flooring rather than plywood.
Good point, I wasn't thinking about the cosmetics of it!
