Washer is being delivered!
-
I just now finally added a Pyrex measuring cup full of bleach into the stagnant water in my washer.
I have my shop vac unpacked and need to read the instructions and learn how to use it
I don't know how they got this washer in here or how they're going to get it out.
For one thing the dryer is on the left and it's in the way.
For another I just measured everything.
By my calculations 28" of of the washer have to fit though spaces that are approximately 28".
It doesn't make sense to me.
But this is what they get paid for.
I'm sure they'll figure it out.
It might happen as early as Tuesday but they haven't called to set the appointment yet.
For another I just measured everything.
By my calculations 28" of of the washer have to fit though spaces that are approximately 28".
It doesn't make sense to me.
But this is what they get paid for.
I'm sure they'll figure it out.
You're probably right, that if it made it into the house that it can go out the same way. There are exceptions, of course, but they're not very common.
OTOH, I think stores are expecting the homeowner to verify that the purchased appliance will fit through doorways and can be installed in the space where it will reside.
Home Depot's "Prepare for Delivery" instructions:
https://www.homedepot.com/c/Appliance_Delivery_Installation
There are also "how to measure" instructions on the page for the appliance you're buying. They walk you through step by step.
You can usually find the dimensions of appliances online. If you have the model number of the dead Amana you can look it up and compare it to the GE Hotpoint that you're buying. If the new one is the same size or smaller you should be good to go.
-
When Lauren was living in Henderson NV we spent Christmases out there and used it as a base of operations for trips to the natural wonders and towns within= driving distance. One year was the Canyon, Sedona and we stayed in Flagstaff. turned out we liked Flagstaff the best. Wonderful town. Found a fantastic little second story wine bar downtown that had a bigger wine list than I've ever seen. It had to have been some rich person's personal project as there's no way the local supported that cellar commercially.
When Lauren was living in Henderson NV we spent Christmases out there and used it as a base of operations for trips to the natural wonders and towns within= driving distance. One year was the Canyon, Sedona and we stayed in Flagstaff. turned out we liked Flagstaff the best. Wonderful town. Found a fantastic little second story wine bar downtown that had a bigger wine list than I've ever seen. It had to have been some rich person's personal project as there's no way the local supported that cellar commercially.
Mayla and I went to that wine bar on your recommendation. It was fabulous.
-
-
-
For another I just measured everything.
By my calculations 28" of of the washer have to fit though spaces that are approximately 28".
It doesn't make sense to me.
But this is what they get paid for.
I'm sure they'll figure it out.
You're probably right, that if it made it into the house that it can go out the same way. There are exceptions, of course, but they're not very common.
OTOH, I think stores are expecting the homeowner to verify that the purchased appliance will fit through doorways and can be installed in the space where it will reside.
Home Depot's "Prepare for Delivery" instructions:
https://www.homedepot.com/c/Appliance_Delivery_Installation
There are also "how to measure" instructions on the page for the appliance you're buying. They walk you through step by step.
You can usually find the dimensions of appliances online. If you have the model number of the dead Amana you can look it up and compare it to the GE Hotpoint that you're buying. If the new one is the same size or smaller you should be good to go.
For another I just measured everything.
By my calculations 28" of of the washer have to fit though spaces that are approximately 28".
It doesn't make sense to me.
But this is what they get paid for.
I'm sure they'll figure it out.
You're probably right, that if it made it into the house that it can go out the same way. There are exceptions, of course, but they're not very common.
OTOH, I think stores are expecting the homeowner to verify that the purchased appliance will fit through doorways and can be installed in the space where it will reside.
Home Depot's "Prepare for Delivery" instructions:
https://www.homedepot.com/c/Appliance_Delivery_Installation
There are also "how to measure" instructions on the page for the appliance you're buying. They walk you through step by step.
You can usually find the dimensions of appliances online. If you have the model number of the dead Amana you can look it up and compare it to the GE Hotpoint that you're buying. If the new one is the same size or smaller you should be good to go.
That's a good idea!
I know I have to read those instructions.
The only real action I can take is to use the shop vac to get the water out of it.
They'll bewater left in it and it's visible and towels can help I'll use a few towels.
At the day, they've been paid and have a contractual obligation to provide the goods and services.
I suppose they could cancel the contract. It's not likely.
I will read the instructions. I will compare the measurements. Now I'm curious to know.
-
Amana
44 H, 27.5 W, 27 D
New
44, 27.0, 27
All same but extra .5" W leeway with new.
Still, they (Lowes) obviously brought in washer 1st, attached to hook ups on right, then brought in matching dryer and put it one left side.
The delivery company will have to agree to take the dryer out of the house and put it back, or the Amana can't come out.
They keep calling me to set up a 4 hr window. I need to talk to them about this tomorrow. I don't think that's something they are obligated to do.
Off to measure the dryer.
If worst comes to worst, I'll have them leave it in the utility shed and put a lock on the door, after all the aggravation I went through to get it.
-
Dryer
H 43.38
W 29
D 27.75So new, 27 to work with. That's fine.
They can rotate the old dryer and have 27.7 to work with.
So the measurements are fine (need to be less than 28 to make it).
Whether they'll be willing to deal with dryer is the question.
My guess is they will say no.
My guess is they'll say policy does not allow them to disconnect and reconnect an alliance that isn't covered by the contract.
Why does everything have to be so complicated?
-
@wtg ,
So, I decided to be proactive. I called this morning.
I was told they can/ will take the dryer out for me and put it back. He made a note of it. He was very helpful.
I'm supposed to receive a text after 5 p.m. with the 4 hr delivery window.
It looks like it's going to happen finally.
I had fun comparing all the measurements.
Now I know exactly khow they were put here.
-
It was delivered. The 17th delivery of 17 by a crew who reports to the warehouse at 4 am- delivers appliance from 7 am- 3 pm, brings the truck back to the warehouse, completes paperwork, goes home, and starts again the next morning. Respect.
Do I like it?
Let me put it this way. I have a 5 year warranty. God couldn't make this washer last 5 years.
I've tried to run in through from Start to Complete 3 times over the last 3 hours.
It's actually on it's 3rd attempt. I don't want to jinx it.
It takes forever, it pauses between cycles for so I'm long it's dead silent for 5 minutes at a time, it showed pictures of the tub filling to the top tier, but it's electronically limited to "max" fill = 1/3, the same as the old one, for the same reasons, government regulations, and approx. 15 electronic controls hidden behind the knobs, that turn nothing.
2x it's reached the stage where it's supposed to spin out the water.
2x I've lost my patience.
the lid stays unlocked but if you dare to open it, everything shuts down, and you have begin at Start, every time, no matter what.
It's dead silent now, meaning it's working, it's not working, or it's actually dead.
I don't know if it will spin the water out or not.
On Day 1.
I have a service appointment on Saturday.
I was offered a replacement. After all that.
These appliances hove as much worth as a $2 disposable lighter to these retailers.
I checked just now.
Again, "spin" light blinking. Dead silence.
This wasn't my first choice, and not surprisingly, it's a POS.
If the water doesn't spin out, they can remove the water. I'm not doing it again.
So, house got ripped up, I was able to clean the "laundry room" floor, I got some nice things in the mail, chiefly an expensive pan, and replacement stove elements and drip pans.
The pan completed my pots and pans. Everything I bought will last 2 lifetimes. My philosophy was buy what I want and never leave them on the stove to burn.
I'll have to take a group picture of them some day. They really are nice.
Of course, I've had no time to unpack, haul garbage, cook, or eat, but at least I have a shiny, new, dead washer, full of water.
I'm calling it now. Dead. November 18, 6:43 p.m., Age: 1 day.
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login